About

A car is a safety-critical machine built every minute. The plant should not run on memory.

Chassira exists to give every vehicle plant a system that runs stamping, welding, framing, paint, marriage, assembly and end of line itself, to spec, at takt, with less rework, downtime and warranty, and to capture the launch engineer's craft before the EV and localisation wave spreads it too thin. The vision is to become the operations layer for the world's vehicle manufacturing.

Pre-launchIndependent product companyFounding team named

Mission

Give every vehicle plant the ability to run body, paint, powertrain and final autonomously

To spec, at takt, with less rework, downtime and warranty, and capture the craft of the launch engineer before it disappears.

Vision

Become the operations layer for the world's vehicle manufacturing, where every panel is stamped, every body is welded and painted, every pack and powertrain is torqued, and every vehicle is launch-assured on Chassira.

Why

Why we are building this

The fact on the plant floor that started it.

Automakers ship around 90 million vehicles a year, each a safety-critical machine of roughly 30,000 parts built to millimetre geometry and Newton-metre torque on lines that launch a car about every 60 seconds. A body-shop geometry drift, a paint-film defect, a mis-torqued fastener or a mis-calibrated ADAS sensor triggers rework, line stops at tens of thousands of dollars a minute, warranty claims and recalls that run to billions.

Most plants run this on sampled inspection, andon reaction, siloed cell PLCs and the tribal knowledge of launch engineers. Robot lines execute fixed programs. Vision stations flag defects after the fact. MES dashboards monitor. Nobody closes the loop across body, paint, powertrain and final.

Why now

  • The EV and software-defined-vehicle transition forcing simultaneous launches, new body materials and mega-castings, new battery lines and more ADAS content
  • Localisation and reshoring of vehicle and battery capacity standing up hundreds of new lines
  • A skilled process-engineer and technician workforce that cannot be hired fast enough for the launch wave
  • Robotic welding, painting and assembly, in-line vision and metrology, torque traceability, battery and ADAS test, edge AI and production-scale Omniverse plant twins have matured for the automotive floor
Principles

How we build

The principles we work by.

01

Trust before autonomy

Crash-safety and IATF gates, grounding, audit, human-in-the-loop and graduated control. The level is a dial the plant turns, and the weld schedule is the last thing it turns.

02

Compounding data

Every supervised correction trains the system. The closed-loop chain from panel to weld to geometry to paint to torque to test to disposition is the asset.

03

Land narrow, expand

One process, one metric, one baseline agreed in writing. Then the plant. Then the fleet.

04

Cite everything

Every answer from the reasoning layer carries its source. Every action carries its evidence and its envelope.

05

Isolate tenants

Vehicle designs, control plans, models and memory never cross an OEM boundary. On-prem for those who need it.

06

Say what is planned

Figures are design targets until they are measured. Scenarios are labelled scenarios. Standards are cited, not claimed.

Focus

What kind of company this is

For anyone checking eligibility or category.

  • An independent, pre-IPO startup building original physical-AI software for automotive vehicle assembly
  • A product company, not a consultancy, systems integrator, reseller, outsourced development shop or division of an automation supplier; services are limited to deployment, integration and qualification support for the platform
  • Not a cloud provider and not associated with cryptocurrency
  • Pre-launch and pre-revenue. Incorporation, headquarters and headcount are not published yet and nothing on this site should be read as claiming them. Leadership biographies are placeholders until verified
Run timeline · scenario

What we are actually building

Every Chassira run is an ordered, inspectable sequence. This is run_41a9c2 on Plant BIW-2 · EV crossover body shop to end of line · shift 1. Scenario completes in 10 steps with one approval gate. Weld schedule change on robot W-14 approved by the body-shop launch engineer, framing offset held inside the envelope, booth humidity trimmed before the predicted dirt defects appeared, one pack held at marriage on a torque trace, and the shift released with full as-built records.

run_41a9c2 Plant BIW-2 · EV crossover body shop to end of line · shift 1 illustrative scenario SUCCEEDED
  1. 01 ingest.shift SUCCEEDED 0.8 s

    Plant Orchestrator · Pulled the shift build sequence, program control plan and qualified envelopes from MES: 412 bodies, four trim variants, weld schedule set W-rev 7, framing targets per station, paint colour blocks, torque specifications. Locked every safety-critical parameter as read-only.

  2. 02 twin.simulate SUCCEEDED 1 m 40 s

    Vehicle-and-Line Twin · Simulated 18 candidate weld-sequence, framing-offset and booth-window combinations on the plant twin, ranked on predicted body geometry, expulsion risk at robot W-14, paint defect map and takt against launch cadence.

  3. 03 stamp.form SUCCEEDED continuous

    Stamp-and-Form · Blank feed on press line P-3 adjusted by 0.4 mm and lubricant dose raised 3 percent for the new coil lot as springback risk on the rear door inner climbed. Panel dimension held inside the window; genealogy handed to framing.

  4. 04 approve.human APPROVAL 3 m 12 s

    Plant Orchestrator · Candidate #6 lowers weld current 2 percent and adds 20 ms hold on robot W-14 to cut predicted expulsion. Weld schedules are crash-safety critical and stay with a human, so the change was held for the body-shop launch engineer and approved at 06:14:52.

  5. 05 weld.join SUCCEEDED continuous

    Weld-and-Join · Approved schedule 7b applied on W-14. Current and force traces confirmed inside the window on the first 40 bodies; predicted expulsion risk fell from 0.31 to 0.06 and no geometry debt was introduced at the adjacent seams.

  6. 06 frame.geometry SUCCEEDED continuous

    Frame-and-Geometry · Framing station FS-1 offset corrected by 0.3 mm on the left B-pillar datum inside the qualified envelope as in-line measurement trended toward the tolerance edge. Gap-and-flush vision confirmed the correction on the next 25 bodies.

  7. 07 paint.finish SUCCEEDED continuous

    Paint-and-Finish · Booth B-2 humidity trimmed 2 points and airflow rebalanced for the dark-colour block as the defect model predicted dirt on horizontal panels. Film build held inside the window on the first colour block.

  8. 08 marriage.torque SUCCEEDED continuous

    Powertrain-and-Battery · Pack PK-1182 held at marriage after a torque-to-yield trace on fastener 7 fell outside the specification curve. Routed to rework with the trace attached; torque specification untouched, as always.

  9. 09 inspect.fuse SUCCEEDED continuous

    Quality-and-Anomaly · Gap-and-flush and paint-defect cameras, weld and torque traces and test results fused per body. Two paint dirt defects localised to booth B-2 zone 3 before the humidity trim took effect; both routed to spot repair, none escaped to final.

  10. 10 eol.release SUCCEEDED 2 m 05 s

    EOL-and-Calibrate · End of line proved alignment, ADAS calibration, leak, brake, roll and functional tests on every vehicle; two ADAS retests sequenced inside takt. Shift 1 released with as-built records, approvals and dispositions written for the quality lead.

Market

The market

Figures are the company's own estimates.

$34BTotal addressable spend: automotive factory automation, robotic welding, painting and assembly, press control, paint-shop automation, MES, inspection, sequencing and plant-twin software
$9BServiceable with Chassira's product and go-to-market
$520MRealistically obtainable within three years, an estimate
~12%Estimated annual growth of the addressable spend
Team

Who is building it

Chassira is led by its founder and CEO, Thomas Bradford, and its CTO, Brian Sullivan. The profiles below describe what each of them owns and the ground they cover.

Founder & CEO

Thomas Bradford

Thomas runs the company and owns the design-partner relationships, the pilot structure and the commercial model. He decides which vehicle plant and which assembly stage go first, what first-time-quality, rework, torque-escape or takt number a pilot is judged on, and who at the plant signs off on the baseline.

Focus: automotive vehicle assembly operations, plant economics, OEM and supplier partnerships, and go-to-market.

CTO

Brian Sullivan

Brian owns the line-edge runtime, the torque, fastening, fit-and-finish and end-of-line inspection models, the as-built vehicle digital twin, and the audit architecture behind every Chassira agent. He is accountable for the bounded, logged write-back into tools, robots and line controls, and for every agent starting in shadow mode.

Focus: edge computer vision, robotics and tool control, simulation and digital twins, safety-critical industrial software.

Hiring

The founding roles we expect to open are on the careers page: edge perception, controls and OT integration, simulation, and a body, paint or assembly process engineer.

See founding roles

Writing

Recent from the blog

2026-10-09 · 5 min

A car every sixty seconds, built blind

Automakers ship around 90 million vehicles a year, each of roughly 30,000 parts, to millimetre geometry and Newton-metre torque, on lines that launch a car about every minute. Most of that is still judged after the fact.

2026-10-09 · 4 min

Hit build quality before the shift

Plants commit a shift of bodies to a weld sequence, a framing setup and a booth recipe before they know the result. The twin changes the order.

Accelerated computing

Physical AI, at the line

A spot weld lasts a fraction of a second and a body passes a station every minute. Perception has to be local, deterministic and fast, so Chassira runs GPU inference at the plant edge and keeps training, simulation and optimisation in the cloud or on-prem.

Jetson Orin · DeepStream · Holoscan · TensorRT

Edge perception

8 to 32 cameras per process area at 15 to 60 FPS, plus torque, dimensional, thermal, robot and paint-instrument streams fused at the cell. Weld and gap alerts under 50 ms and paint or dimensional prompts under 150 ms are the design targets. Jetson Thor is planned for higher density.

Triton · NIM

Model serving

Weld-defect, geometry-risk, paint-risk, torque and battery, and takt-risk models served at the plant edge with versioned rollback, routed by latency, tenant and cost, with canary rollout by line.

DGX or HGX · NeMo

Training

Weld, paint and gap vision, dimensional models, NeMo IATF and spec reasoning and GPU-accelerated stamping, springback and weld-geometry FEA surrogates. 150 to 600 GPU-hours per plant during onboarding, then monthly retraining from engineer corrections. Dedicated capacity is planned.

Omniverse · OVX

Plant twin

Body framing, weld sequence, robot reach, paint flow and line balance simulated before the shift. The pattern is production proven at BMW and Mercedes-Benz, per the architecture; Chassira's twin and OVX capacity are planned.

Cosmos · Omniverse Replicator

Synthetic data

Rare weld defects, paint failures, geometry-drift modes, occluded joints and misbuild cases generated and validated against real distributions before promotion. 50,000 to 250,000 variants per program is the design target. Planned.

cuOpt

Optimisation

Line sequencing and JIS feeding, AGV routing, takt, line balancing, buffers and retest sequencing.

Isaac · Isaac ROS

Robot cells and AMRs

Robotic weld, paint, assembly and inspection cells and AGV and AMR line-feed autonomy, with skills validated in simulation before a cell runs them.

RAPIDS

GPU ETL

Telemetry ETL across weld and press parameters, measurements, paint readings, torque traces, battery and ADAS results, non-conformance and takt history for retraining and benchmarks.

NeMo Guardrails · NVIDIA AI Enterprise

Policy and deployment

Spec, IATF, functional-safety, cyber and human-approval policy enforced before any write; supportable on-prem or plant-edge deployment for regulated OEM plants.

Guardrails

An agent near a crash-safety joint needs a leash

Chassira writes to production equipment. Every capability is scoped, every write is policy-checked against the qualified envelope, safety-critical parameters are locked, and every action is written to an append-only audit log the plant owns.

  • Bounded action space. Each agent writes only to an explicit tag allow-list, inside per-tag rate and magnitude limits and the qualified process envelope for the joint family, colour block or vehicle program.
  • Policy engine before every write. Autonomy level, shift, program, interlock state and operator presence are evaluated before a setpoint moves. NeMo Guardrails enforces spec, IATF, functional-safety, cyber and human-approval policy before any action writes back to robots, MES, QA or work instructions.
  • Safety-critical parameters locked. Weld schedules wait for a named body-shop engineer until the joint family is qualified. Torque specifications, battery-joint parameters and end-of-line test limits and verdicts are read-only to every agent, always.
  • Immutable audit log. Append-only and exportable. Every action records source evidence, the approved envelope, confidence, estimated quality, rework, downtime and warranty impact, rollback path, approver and vehicle scope.
  • Hard fallback. Loss of the edge node, the network or a model returns control to the press, robot, booth or MES controller's last known-good state. Safety-rated PLCs and interlocks are never in Chassira's path.
  • Tenant and program isolation. Vehicle designs, control plans, specs, models and memory never cross an OEM boundary. On-prem and plant-edge deployment are available for regulated plants.

Compliance posture

Compliance and certification status
ItemScopeStatus
SOC 2 Type ICloud control plane QUEUED Planned, first 6 months, with an IATF and functional-safety-aware review
SOC 2 Type IICloud control plane QUEUED Planned, 6 to 12 months
SSO and RBACConsole and approvals QUEUED Planned, 6 to 12 months
IATF 16949 and APQP assurance packagesDisposition and traceability evidence QUEUED Planned, 6 to 12 months; not a certification claim
ISO 26262-aware controlFunctional-safety requirements cited in reasoning and gates RUNNING In the design; not a certification claim
Standards-cited reasoningIATF 16949, APQP and PPAP, torque specs, recall procedures RUNNING In the design, every answer cites its source
Per-tenant and program isolationDesigns, control plans, models, memory RUNNING In the design from day one
On-prem and plant-edge deploymentRegulated OEM plants RUNNING Design option

Read the security overview

FAQ

Straight answers

The questions plant managers, launch engineers and quality leads ask in the first meeting.

Yes, but only within an explicit tag allow-list with per-tag rate and magnitude limits, inside the qualified envelope, and only at the autonomy level your plant has set. Design partners start in shadow mode, where Chassira writes nothing. Weld-schedule changes wait for a named body-shop engineer, and torque specifications, battery-joint parameters and end-of-line test limits and verdicts are read-only to every agent, always.

Get started

Come build the car plant's operating system

Founding roles are open on the careers page. Design partners are welcome on the contact page.