agent.stamp_form · module Stamp and form
Stamp-and-Form
Press force, blank feed, lubrication, die condition, panel dimension
Senses press force and stroke, blank position and feed, lubrication and die condition from press telemetry and vision, predicts splits, wrinkles and springback before the panel leaves the die, and adapts blank feed, lubrication and press settings inside the qualified window to hit panel dimension and material yield.
press.read_forceblank.set_feedlube.set_dose
agent.weld_join · module Weld and join
Weld-and-Join
Spot and laser weld, self-pierce rivet, flow-drill, structural adhesive, robotic joining
Senses weld current, force and expulsion, laser seam state, rivet setting force and adhesive bead from servo-gun, laser and robot telemetry and seam vision, predicts joint quality and geometry debt per body, and proposes weld schedules, sequences and robotic joining parameters. Weld-schedule changes are crash-safety critical and stay with a named body-shop engineer until the joint family is qualified.
gun.read_traceweld.propose_scheduleseam.read_vision
agent.frame_geometry · module Frame and geometry
Frame-and-Geometry
Body-in-white dimension, framing accuracy, gap-and-flush
Reads in-line dimensional measurement, framing-station offsets and gap-and-flush vision, predicts where body-in-white variation is heading before bodies go out of tolerance, and proposes framing and fixture corrections and upstream weld-sequence changes so the body hits millimetre targets at the framing station rather than at audit.
metrology.read_bodyframe.propose_offsetgapflush.read_vision
agent.paint_finish · module Paint and finish
Paint-and-Finish
Pretreat and e-coat, sealer, film build, flash and cure, booth environment
Senses pretreat and e-coat chemistry, film build, oven and flash profiles and booth temperature, humidity and airflow, predicts dirt, runs, orange peel and film-build faults before the body is inspected, and adapts booth environment, flash and cure setpoints inside the qualified window to a durable, defect-free finish.
booth.read_envbooth.set_envfilmbuild.read
agent.powertrain_battery · module Powertrain and battery
Powertrain-and-Battery
Engine and e-axle build, cell-to-pack joining, coolant and HV integrity, torque-to-yield
Reads torque-to-yield traces, cell-to-pack joining signals, coolant and high-voltage integrity tests and marriage-station telemetry, predicts joint and pack-integrity faults per unit, and flags or holds units before they leave the station. Torque specifications and battery-joint parameters are safety critical and are never changed by the agent; it proposes, a named engineer decides.
torque.read_tracepack.read_integrityunit.hold
agent.trim_fasten · module Trim and fasten
Trim-and-Fasten
General-assembly torque, fluid fill, glazing, body-chassis marriage
Reads torque-tool traces, fluid-fill volumes and pressures, glazing bead and placement vision and marriage-station state across general assembly, predicts mis-torque, under-fill and glazing faults per vehicle, and routes or holds vehicles before the fault reaches end of line. Torque specifications stay with the process engineer.
torque.read_tracefill.read_volumevehicle.route
agent.eol_calibrate · module End of line and calibrate
EOL-and-Calibrate
Wheel alignment, ADAS sensor calibration, headlamp aim, leak, brake, roll, functional test
Reads alignment, ADAS calibration, headlamp aim, leak, brake, roll and functional-test results per vehicle, predicts calibration and test failures from upstream build data, and sequences retests and rework so end of line proves the vehicle rather than discovering it. It never passes a vehicle a test has failed.
eol.read_resultsadas.read_calibrationretest.sequence
agent.quality_anomaly · module Quality and anomaly
Quality-and-Anomaly
Weld, geometry, paint, torque, battery and ADAS defects, in real time
Fuses weld traces, dimensional data, gap-and-flush and paint-defect vision, torque traces and battery and ADAS results into one model of build quality per vehicle, detects and predicts defects as they form, localises each to station, robot, tool and body, and routes the finding back to the agent that can prevent the next one.
sensors.fusedefect.localisevehicle.flag
agent.sequence_flow · module Sequence and flow
Sequence-and-Flow
Line sequencing, JIS and JIT feeding, AGV and AMR logistics, takt, line balancing, buffers
Reads the build sequence, part feeding, AGV and AMR fleet state, station cycle times and buffers, prices every sequencing and buffer move in takt, downtime minutes and rework, and optimises sequence, feeding and routing against launch cadence with cuOpt. Sequencing writes go to the MES and fleet manager inside agreed limits.
cuopt.sequencemes.read_sequenceamr.route
agent.robot_inspect · module Weld and join
Robot-and-Inspect
Robotic weld, paint and assembly cells, vision-inspection stations
Drives robotic weld, paint and assembly cells and vision-inspection stations: perceives part and body pose, plans paths and inspection views, coordinates cells to takt, and keeps every move inside interlocked limits. Skills are validated in simulation before they run in a cell.
isaac.plan_pathcell.read_stateinspect.capture
agent.quality_conformance · module Quality and anomaly
Quality-and-Conformance
First-time-through, PPM, recall and warranty risk, IATF and APQP traceability
Builds the as-built record per vehicle, dispositions non-conformance against IATF 16949, APQP and PPAP criteria with cited evidence, tracks first-time-through and PPM by station, and assembles the traceability packets a quality lead signs for launch, audit and warranty review.
mes.log_vehicledisposition.writeaudit.write
agent.vehicle_knowledge · module Quality and anomaly
Vehicle-Knowledge
Specs, control plans, IATF and APQP rules, torque specs, recall procedures, operator Q&A
Answers process, specification and standards questions from weld, paint and torque specs, APQP and PPAP control plans, IATF 16949 rules, ISO 26262-aware functional-safety requirements and recall and warranty procedures, with every answer cited to its source and scoped to the tenant. It never writes to a controller.
rag.retrievestandards.citeprocedure.lookup
twin.vehicle_line · module Vehicle-and-line twin
Vehicle-and-Line Twin
As-built vehicle, body and line simulation
Simulates welding, framing geometry, paint, torque and takt on an Omniverse plant twin, compares as-built against as-designed, and auto-optimises the weld sequences, framing offsets, paint windows and line balance the other agents execute so the shift hits build quality, warranty risk and launch schedule before it starts. Weld-thermal and geometry FEA, stamping and springback, crash and structural surrogates and paint-flow simulation are the GPU workloads behind it.
twin.simulatetwin.compare_asbuiltsequence.optimise
agent.orchestrator
Plant Orchestrator
Planning, arbitration, human approval
Plans the shift, arbitrates between agents competing for the same station or sequence, enforces the autonomy level per agent and per tag, and routes anything crash-safety or IATF relevant, weld schedules and torque specifications first among them, to a named approver.
plan.composepolicy.evaluateapproval.request